PPE Detection
Harness, hard hat and hi-vis checked in the zones you set on scaffolds, slab edges and roofs. A miss is an alert with a snapshot.
Industry · Construction
Optara Systems turns your site cameras into a safety and security layer: missing harnesses, people in plant zones and after-hours intruders, flagged while there’s time to act.
Works with existing ONVIF-compatible IP cameras
No camera replacement
AI runs on-site, on the edge device
Alerts in under 2 seconds
What Optara Systems can watch for
The Optara Systems solutions you can choose from, grouped by when they matter. They run on the Optara Systems edge device and console, on-site, so your camera streams aren’t sent off-site to be analysed.
Harness, hard hat and hi-vis checked in the zones you set on scaffolds, slab edges and roofs. A miss is an alert with a snapshot.
A fall or collapse flagged with the clip, so someone working alone early or late is never down unnoticed.
In and out counts at the pedestrian gate: a live headcount to check against the sign-in register at knock-off or in an evacuation.
Integrates with vape and smoke sensors near fuel, gas and flammable stores, so the alert reaches the console where a spark matters.
Counts people waiting at the hoist, sign-in or crib room, and flags a queue that eats into the shift.
Zones around excavators and lift areas by day; the fence line, containers and laydown yard armed at knock-off. A crossing is an alert with the clip.
Tools or materials picked up from the laydown yard outside working hours, flagged for a person to check before acting.
Logs every delivery and ute at the gate with plate, time and image, ready for police and insurers if materials go missing.
Flags a second person following one swipe through the site office, secure store or plant-room door.
Early warning for a visible weapon at the gate or site office, with the clip in the console.
Opt-in. A short watch-list at the gate, such as people with revoked site access, with every match confirmed by a person.
Type “white ute near the container after 6 pm” and get the clip in minutes, across every camera.
Zones on work fronts show worked and idle time by day, so delays are visible before the programme slips.
Where people and plant actually move, to put walkways, laydown and crib rooms where the build needs them.
Shows when the gate, hoist and loading bay are busiest, so deliveries and lifts stop colliding.
Also configurable
Beyond the solutions above, these checks can be set up for your site, on the cameras you choose. Each alert arrives in the Optara Systems console with the clip.
Can be configured to flag visible flame or smoke in the compound, on a deck or near hot works.
Can be configured to flag materials left across an exit, stair or egress route.
Can be configured to flag anyone inside the compound or site office after knock-off.
Can be configured to flag someone waiting along the fence line or at the gate after hours.
Can be configured to flag trucks idling at the gate or hoist beyond a set time.
Can be configured to flag more people than allowed in a hoist or on a scaffold deck.
We’ll show harness checks, plant exclusion zones and after-hours alerts on footage like yours, then map the cameras you already run.